Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Barnant 115: (1 year) CAL VER /5520
DATE:                  27-Aug-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       25
NUMBER OF LINES:       110
CONFIGURATION:         Fluke 5520A
=============================================================================
#
# Source:
#   BARNANT 115 Manual No. A-1925-27
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5520A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         {Procedure not formally tested with UUT.}
  1.001  DISP         {See procedure README file.}
  1.002  ASK-                        P J                          F        W
  1.003  ASK+           K                              X
  1.004  HEAD         PRELIMINARY INSTRUCTIONS
  1.005  DISP         Warm-up time: NONE
  1.005  DISP         Temperature: 18 - 28 degC
  1.005  DISP         Humidity: <80%
  1.006  DISP         [32]                WARNING
  1.006  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.006  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.006  DISP         personnel fail to observe safety precautions.
  1.007  HEAD         THERMOCOUPLE
  1.008  MEM2         Type the letter of the Thermocouple type you are using.
  1.009  JMPL         PROCEED ZCMPI(MEM2, "K")
  1.010  JMPL         PROCEED ZCMPI(MEM2, "J")
  1.011  JMPL         PROCEED ZCMPI(MEM2, "T")
  1.012  JMPL         PROCEED ZCMPI(MEM2, "E")
  1.013  DISP         The selected type of thermocouple is NOT available.
  1.014  JMP          1.008

  1.015  LABEL        PROCEED
  1.016  DISP         Connect the 5520A TC Terminals to the INPUT JACK
  1.016  DISP         (T2 connector, right side), using a [MEM2] type
  1.016  DISP         thermocouple wire and connectors.  Observe polarity.
  1.017  DISP         Press the ON/OFF button to turn the UUT ON.
  1.017  DISP         Press the J.T.E.K pushbutton to select [MEM2] type.
  1.017  DISP         Press the 1/.1deg pushbutton to select .1deg.
  1.017  DISP         Press the DEG C/F pushbutton to select F.
  1.018  JMPL         K_TYPE ZCMPI(MEM2, "K")
  1.019  JMPL         J_TYPE ZCMPI(MEM2, "J")
  1.020  JMPL         T_TYPE ZCMPI(MEM2, "T")
  1.021  JMPL         E_TYPE ZCMPI(MEM2, "E")

  1.022  LABEL        K_TYPE
  1.023  HEAD         {K TYPE THERMOCOUPLE}
  1.024  5520         -300.0degF     0.1% 0.7U                    _K TC    2W
  2.001  5520         0.0degF        0.1% 0.7U                    _K TC    2W
  3.001  5520         2500.0degF     0.1% 0.7U                    _K TC    2W
  4.001  DISP         Select degC.
  4.002  5520         -200.0degC     0.1% 0.4U                    _K TC    2W
  5.001  5520         32.0degC       0.1% 0.4U                    _K TC    2W
  6.001  5520         1370.0degC     0.1% 0.4U                    _K TC    2W
  7.001  JMP          25.001

  7.002  LABEL        J_TYPE
  7.003  HEAD         {J TYPE THERMOCOUPLE}
  7.004  5520         -300.0degF     0.1% 0.4U                    _J TC    2W
  8.001  5520         0.0degF        0.1% 0.4U                    _J TC    2W
  9.001  5520         1800.0degF     0.1% 0.4U                    _J TC    2W
 10.001  DISP         Select degC.
 10.002  5520         -100.0degC     0.1% 0.7U                    _J TC    2W
 11.001  5520         32.0degC       0.1% 0.7U                    _J TC    2W
 12.001  5520         900.0degC      0.1% 0.7U                    _J TC    2W
 13.001  JMP          25.001

 13.002  LABEL        T_TYPE
 13.003  HEAD         {T TYPE THERMOCOUPLE}
 13.004  5520         -400.0degF     0.1% 0.7U                    _T TC    2W
 14.001  5520         0.0degF        0.1% 0.7U                    _T TC    2W
 15.001  5520         750.0degF      0.1% 0.7U                    _T TC    2W
 16.001  DISP         Select degC.
 16.002  5520         -200.0degC     0.1% 0.4U                    _T TC    2W
 17.001  5520         32.0degC       0.1% 0.4U                    _T TC    2W
 18.001  5520         390.0degC      0.1% 0.4U                    _T TC    2W
 19.001  JMP          25.001

 19.002  LABEL        E_TYPE
 19.003  HEAD         {E TYPE THERMOCOUPLE}
 19.004  5520         -300.0degF     0.1% 0.7U                    _E TC    2W
 20.001  5520         0.0degF        0.1% 0.7U                    _E TC    2W
 21.001  5520         1700.0degF     0.1% 0.7U                    _E TC    2W
 22.001  DISP         Select degC.
 22.002  5520         -200.0degC     0.1% 0.4U                    _E TC    2W
 23.001  5520         32.0degC       0.1% 0.4U                    _E TC    2W
 24.001  5520         900.0degC      0.1% 0.4U                    _E TC    2W

 25.001  END